Description
12V | For larger vehicle batteries, supply function.
The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20-200Ah and is also suitable for maintenance charging up to 300Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, a winter program for charging in cold weather and an AGM option which maximises the performance life of most Stop/Start batteries. The MXS 10 also has a temperature sensor for optimised charging and it can even be used as a power supply source for 12V equipment.
Features
- Maintains larger batteries up to 300Ah
- Easy-to-read LED display
- Comes with Connect – Eyelet and Connect – Clamp connectors
- Splash and dust proof (IP65)
- Safe spark-free operation
- Reverse polarity protected
- Short circuit proof
TECHNICAL DATA
- Input: 220–240 VAC, 50–60 Hz, 1.4 A
- Output: 14.4/14.7/15.8/13.6 V, 10 A
- Battery capacity: 20–300 Ah
- Charging category: AC charging
- Back current drain*: Corresponding to less than 1 Ah/month
- Battery voltage: 12V
- Battery chemistry: Lead acid
- Ambient operating temperature: -20 ˚C to +50 ˚C
- Start voltage: 2.0 V
- Ripple**: Less than 4 %
- Battery types: 12 V:; WET; MF; Ca/Ca; AGM; GEL
- Degree of protection: IP65
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.